Page 68Wireless Remote Battery Replacement Procedure1. Start by removing the rubber cover to theremote. (Figure A)2. Turn the remote unit over and locate the batterydoor. (Figure B)3. Rotate the battery door, with a coin, counterclockwiseuntil the dot aligns with the Open arrow (Figure C).4. Remove battery door using coin to pry the door upward(Figure D).5. Replace battery using CR2025 or equivalent (Figure E).6. Reinstall the battery cover, using the coin to close(Figure F).7. Reinstall rubber housing onto remote(Figure G).Note: Remote unit is water resistant, therefore the unitshould never be left in the spa while the cover is on and spa is not in use.2/3LIGHTSNC AIRSPAJETS1 2/3LIGHTSNC AIRSPAJETS1Fig. AFig. A105358www.polyplanar.comPoly-Planar Inc.Warminster, PA 18974(215) 675-7805Made in ChinaOPEN CLOSEDBatteryDoor105358www.polyplanar.comPoly-Planar Inc.Warminster, PA 18974(215) 675-7805Made in ChinaOPEN CLOSEDBatteryDoorFig. BFig. BOPEN CLOSEDOPEN CLOSEDFig. CFig. COPEN CLOSEDOPEN CLOSEDFig. DFig. DOPENCR2025CLOSEDOPENCR2025CLOSEDFig. EFig. EOPEN CLOSEDOPEN CLOSEDFig. FFig. F2/3LIGHT MODEHot TubJETS1 2/3LIGHT MODEHot TubJETS1Fig. GFig. G
