Jacuzzi Platinum Series Owner's Manual

Also see for Platinum Series: Owner's manual

Contents

OPERATIONControl PanelThe control panel is easy to use with fingertip control of all the spa's functions. Control of temperature, jets, blower,filtration and spa light is readily accessible at your fingertips.•••OFFPROGRAM LIQUID CRYSTALDISPLAY WARM TIME LIGHTMODE COOL JETS BLOWERI0IFHEATSTANDARDFILTER 1PlatinumSERIES6Temperature Controls: Wheneither of these buttons is pressedonce, the display will show thetemperature that has been set, inaddition to the words SET HEAT. Each time either ofthese buttons is pressed again, the set temperature willincrease or decrease in increments of 1°F depending onwhich button is pressed. After 3 seconds, the display willautomatically show the current spa water temperature.Jets Control: Press this button once toactivate a jet pump on one side of the spa;press it twice for both pumps to operatesimultaneously for maximum effect. Press ita third time to turn off the jet pumps. This button does notaffect the filter pump operation which is an independentfunction.When the jet action mode is started, it will automati-cally stop after 30 minutes of operation.Blower: Starts or stops the blower foraeration in the spa. When both pumpsare operating, the blower is disabled.The blower will also automatically stop after 30minutes of operation.I0IFHEATSTANDARDFILTER 1Light: Press the button once to activate thehighest setting, again for the medium settingand again for the lowest setting. A fourthpress of the button will turn the light OFF.The lights automatically turn OFF after 4 hours ofoperation.Time: Press to display time of day. Currentspa temperature display will automaticallyresume after five seconds.Program Function: Initiates time settingand panel lock routines.Mode Function: Switches spa operation toeither the economy or standard mode. In theeconomy mode, the spa will heat but onlywhen the water temperature is 20°F below the setpoint.In the standard mode, the spa will heat as needed tomaintain the set temperature.Liquid Crystal DisplayContinually shows operatingstatus of the spa, as well as thevarious monitoring functionsand programming information.