Janam XG200 User Manual

Also see for XG200 Series: User manual

Janam XG200 User Manual Manual pdf 13 page image

Getting Started XG200 User ManualJanam Technologies LLC Version 2, April 2019 Getting Started 2-7Turning the XG200 Rugged Touch Computer Off1. To simply put the XG200 display to sleep, just briefly press the Power Key (marked red in itscenter). The display will turn off. To turn the XG200 back on from this state of sleep, depress thePower Key again. The welcome screen will come up, and by swiping up you will return to thelast used app.2. To put the XG200 display to sleep and also shut down Android, press and hold the Power Key(marked red in its center) until the “Power off/Reboot/Airplane Mode” overlay appears. Press on"Power Off" until you feel the vibration and see the “Technology at Work” logo. To turn it back on,press the Power Key to reboot Android. Here you can turn sound on or off via the bell icon, orreturn to normal operation by tapping the multitask icon between the bells.3. To completely power down the XG200 and reboot it from a cold start, press and hold the PowerKey and keep holding it for about ten seconds. The display will go black, and in a few secondsthe XG200 will reboot automatically.Touch Screen NavigationThe XG200 uses capacitive multi-touch technology. Almost all of the XG200’s functions can beaccessed and used by tapping, swiping or dragging with one finger. Some operations, such aszooming in and out, are performed with pinching two fingers together or dragging them fartherapart.Note that capacitive touch works by sensing your fingers. Never use an actual pen, pencil, or anysharp object to operate the touch screen. They may damage the touch screen.TouchTouch a tile or objectto select or open it.Touch and holdTouch and hold a tileor object to bring upavailable options.Touch and dragTouch and then drag/swipe an object tomove it in any direc-tion.Pinch and spreadPut two fingers onthe display, thendrag them togetheror apart to zoom inor out.