26Drawing Up the Bobbin ThreadBuilt-in Needle Threaderz Raise the needle to its highest position by turningthe hand wheel toward you.Turn the power switch off.Lower the presser foot.Depress the needle threader knob as far as it willgo. The hook comes out through the needle eyefrom behind.q Needle threader knobw Hookx Draw the thread down around the threader guideand under the hook.e Threader guidec Release the threader knob slowly while holding thethread end with your hand. A loop of the thread ispulled up through the needle eye.v Remove the loop from the threader and pull out thethread end from the needle eye.NOTES:The automatic threader works well with the threads#50-90 and needles #11-16, as well as the blue tippedneedle.zxcvwqwezxcewqwqz Raise the Presser Foot Lifter.Turn the power switch on.Hold the needle thread with your finger.x Press the Up/Down needle button twice to pick upthe bobbin thread.Draw up the needle thread to bring up a loop of thebobbin thread.q Needle threadw Bobbin threade Up/Down needle buttonc Slide 10 cm (4˝) of both threads to the back underthe presser foot.
