Jenn-Air D156 Use And Care Manual

Oven Operation Baking or RoastingBASIC INSTRUCTIONS1. Position oven racks.2. Touch Bake Pad or Convection Bake Pad.3. Turn Set Dial to desired temperature.To set oven on bake or convection bake:1. Place oven racks on proper rack positions. (See p. 23)2. Touch Bake Pad or Convection Bake Pad.Indicator Words BAKE or CONV BAKE will flash and 3 dashes will be shown.NOTE: If more than 10 seconds elapse between touching a pad and turningthe Set Dial, the oven is not set and Display will return to previous Display.3. Turn Set Dial until desired oven temperature appears in the Display.The Set Dial must be turned clockwise one click. 325 ° will appear. The SetDial can then be turned in either direction until the desired temperature is set.(Allowable range is 140° to 550°.)After 3 seconds the oven will begin to preheat. The Indicator Words ON, PRE,and either BAKE or CONV BAKE will appear in the Display. The temperatureshown will be 140° or the oven temperature whichever is higher.NOTE: The Indicator Word PRE will not appear if the actual oven temperatureis within 100° of the set temperature.EXAMPLE: If at 10 o'clock you set the oven for 350 ° for convection baking,after 3 seconds the Display will show:LI. LILI []During the preheat, the Display will show a rise in 5 ° increments until programmedtemperature is reached. When the oven is preheated, the oven will beep, theON and PRE Indicator Words will go off, and programmed oven temperaturewill be displayed.NOTE: Oven will preheat for approximately 5 to 9 minutes. There will be nobeep if the PRE Indicator Word w_s not shown.IMPORTANT: Whenever ON appears in the Display, the oven is heating.To recall temperature set during preheat: Touch the appropriate Bake or ConvectionBake Pad. Temperature will be briefly displayed, then will automatically return toon-going program.To change temperature set: Touch appropriate pad and turn Set Dial to new desiredtemperature.4. Touch Cancel Pad to turn oven off at end of baking.22