Jenn-Air D156 Use And Care Manual

Other Hints onCaring for Your RangeOven Light BulbBefore replacing bulb, disconnect power to oven at the main fuse or circuit breakerpanel. Be sure that the entire oven cavity including the light bulb is cool beforeattempting to remove.To replace light bulb:1. Carefully remove the glass light lens and lensretainer by removing the two screws in the lightlens retainer using a phillips screwdriver. Note: Thelight lens is separate from the light lens retainer.The two pieces will drop down into your hands atthe same time. Do NOT remove the remaining twoscrews.2. To obtain firm grasp on bulb, wear protectiverubber gloves. Remove by turning bulb to the left.Do not touch a hot oven light bulb with a dampcloth as bulb will break. Note: If the bulb doesbreak and you wish to remove it, be certain powersupply is disconnected and wear protective gloves.You_may contact your authorized Jenn-Air ServiceContractor for service.3. Replace bulb with a 40 watt oven-rated appliancebulb. Bulb with brass base is recommended toprevent fusing of bulb into socket. "4. Place light lens inside of light lens retainer. Hold-ing the light lens and lens retainer in place, insert /the two screws into the light lens retainer andtighten.Access Door (Model S176 only)The access door is easily removed to clean under therange if necessary. To remove door, pull door downand lift off pivot points. To replace door, slide doorover pivot points; lift up and insert prongs into holes inthe range.To avoid the possibility of accidentally disconnectingany part of the ventilation system, do not use the areabehind the access door for storage i i! i41