Jenn-Air JB36NXFXLW00 Technical Education

Also see for JB36NXFXLW00: Installation guide User & care guide Use & care guide

Contents

Jenn-Air JB36NXFXLW00 Technical Education Manual pdf 27 page image

2-17 195. Connect the 7 ft (2.13 m) flexible codes approved watersupply line to the refrigerator.NOTE: If the main water shutoff valve is behind therefrigerator, a secondary water shutoff valve may be installedin line with the water supply line at the front of the product.6. Turn on the water supply valve and check all connections forleaks.7. Plug in the refrigerator or reconnect power.8. Flush the water system. See “Water System Preparation.”NOTE: Allow 24 hours to produce the first batch of ice.Discard the first three batches of ice produced. Allow 3 daysto completely fill ice container.Plug in Refrigerator1. Set control switch at top of cabinet to the OFF position.2. Plug into a grounded 3 prong outlet.Move Refrigerator to Final LocationIMPORTANT:� To avoid floor damage, make sure levelers are raised (nottouching floor) and refrigerator is on rollers before moving.� Use the installation block, attached to the door hinge, as areference to make sure the refrigerator is pushed back farenough into the opening, so that when the panels are installedthey will be flush with the adjacent cabinets.NOTE: A flush installation is not possible with a 24" (60.9 cm)deep opening.� After the refrigerator is leveled and aligned, remove theinstallation block from the door hinge and use it to check thespacing between the panels and adjacent cabinets.NOTE: The installation block is designed to provide accuratespacing for ³⁄₄" (1.9 cm), ³⁄₈" (9.53 mm) and ¹⁄₈" (3.18 mm).1. Place top of cardboard carton or plywood under refrigerator.Remove dolly.2. Move the refrigerator straight back and evenly into theopening. Be sure that the water tubing is not kinked and thepower supply cord is on top of the refrigerator.NOTE: If the power supply cord is behind the refrigerator, itwill not install properly.3. Make sure the installation block is flush with the adjacentcabinets.A. Household water lineB. Nut (purchased)C. Ferrule (purchased)D. CouplingE. BulbF. NutG. Refrigerator water tubingABCDEF GElectrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove ground prong.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result in death,fire, or electrical shock.WARNINGWARNINGTip Over HazardRefrigerator is top heavy and tips easily when notcompletely installed.Keep doors taped closed until refrigerator iscompletely installed.Use two or more people to move and installrefrigerator.Failure to do so can result in death or serious injury.¹⁄₈"(3.18 mm)³⁄₈"(9.53 mm)³⁄₄"(1.9 cm)Installation Instructions (continued)