Jenn-Air JDS9860 User Manual

Also see for JDS9860: Use and care guide Use & care guide Use & care guide User guide

11Activating and Canceling the Clock/Day of Week Display:1. Press SETUP.2. Select CLOCK using the left Quickset pad.3. Press the right Quickset pad to scroll until DISABLE isdisplayed.4. Select DISABLE using the left Quickset pad.5. Select TIME using the left Quickset pad.6. Select ON or OFF using the right or left Quickset pad to turnthe clock display On or Off.Day of the week:7. Use right Quickset pad to scroll to DAY.8. Select DAY using the left Quickset pad.9. Select ON or OFF using the right or left Quickset pad to turnthe Day of the Week display On or Off.10. To exit the Setup mode, press SETUP.TimersSetting the Timers (Timer 1 or Timer 2):1. Press TIMER 1 or TIMER 2.2. Press one of the displayed times using the Quickset pads, orpress the number pads to enter the desired time.IMPORTANT: Each press of the displayed time choices addsadditional time. For example, pressing “10 MIN” three timesprovides 30 minutes on the timer (0:30).3. Press ENTER (located on the number pad).Changing the Amount of Time Entered Once the Timer Starts:1. Press TIMER 1 or TIMER 2 once.2. Press the displayed times on the Quickset pads repeatedlyuntil the desired time is entered.ORPress the number pads to enter the new desired time.3. Press Enter pad.Canceling the Timer:1. Press TIMER 1 or TIMER 2 twice.If Both Timers Are Active:If the desired Timer is already in the foreground, press once foredit mode and twice to cancel the Timer. If the desired Timer isnot in the foreground, follow these steps:1. Press the desired TIMER pad once. The selected Timer willcome to the foreground.2. Press TIMER a second time to access the edit mode in orderto make changes.3. Pressing TIMER a third time will cancel the Timer.Changing the Timer Beeps:The signal beeps for TIMER 1 and TIMER 2 can be changed. Theoptions available are 2 beeps every 30 seconds, 2 beeps every60 seconds or 1 beep only. The default setting is 1 beep.1. Press SETUP.2. Use right Quickset pad to scroll to TONES.3. Select TONES using the left Quickset pad.4. Use right Quickset pad to scroll to TIMERS TONES.5. Select TIMERS TONES using the left Quickset pad.6. Use right Quickset pad to scroll to the desired timer beepformat (2-30 SEC, 2-60 SEC or 1 BEEP).7. Select the desired timer beep using the left Quickset pad.8. Press SETUP to exit Setup mode.Locking the Oven Control and Oven DoorThe lock feature shuts down the control pads (buttons) and locksthe oven door to avoid unintended use of the oven.The lock feature is preset unlocked, but can be locked.If the oven is currently in use, the controls and oven door cannotbe locked.To Lock the Oven Control and Oven Door:Press and hold BACK and ENTER for 3 seconds or until“CONTROL LOCKED” appears in the display.To Unlock the Oven Control and Oven Door:Press and hold BACK and ENTER for 3 seconds. “UNLOCKINGDOOR” will appear in the display when the control and door areunlocking.Oven LightThe oven light automatically comes on when the door is opened.When the door is closed, press the OVEN LIGHT pad to turn theoven light on and off. A beep will sound every time the Oven Lightpad is pressed. If the oven light is on when the door is opened,the light will go off when the door is closed.Setup1. Press SETUP to begin.2. Use right Quickset pad to scroll through Setup options.3. Select the desired option by pressing the Quickset pads.NOTE: To back out of a screen without making any changes,press the Setup pad. The display will return to the time of day.ClockSee the “Clock” section for more details. Use the Clock option to:■ Set the time of day.■ Set day of week.■ Select AM or PM (12-hour mode only). AM or PM will notshow with the time of day in the display.■ Choose a 12- or 24-hour clock display.■ Disable the clock display.LanguageThe language of the screens in the display window can be set toEnglish, French or Spanish.To change the display language from English:1. Press SETUP.2. Use right Quickset pad to scroll to LANGUAGE.3. Select LANGUAGE using the left Quickset pad.4. Use right Quickset pad to scroll to the desired language.5. Select the desired language using the left Quickset pad.6. Press SETUP to exit the Setup menu.