Jenn-Air JER8650 Manual

/9 Care and CleaningAfter Self-Cleaning 7. When the clean time has been completed, the indicatorword CLEAN will turn off. The indicator word LOCK willAbout one hour after the end of the clean cycle, the lock remain on until the oven has cooled. When the oven haswill disengage and the LOCK indicator word will turn off. cooled, the indicator word LOCK will turn off andthe doorAt this point, the door can be opened, will automatically unlock.Some soil may leave a light gray, powdery ash which can beremoved with a damp cloth. If soil remains, it indicates that TO Cancel Self-Cleanthe clean cycle was not long enough. The soil will be re-moved during the next clean cycle. 1. Press the Stop/Clear pad. The door will be locked whilethe LOCK indicator word remains in the display.If the oven racks were left in the oven and do not slidesmoothly after a clean cycle, wipe racks and embossed rack Depending on the length of time the oven had beensupports with a small amount of vegetable oil to restore ease cleaning, it may take up to an hour for the oven to coolof movement, down. When the oven is cool, the door will automaticallyunlock and it can be opened.To Delay the Start of a Clean Cycle1-3. Follow steps 1-3 on page 18.4. Press the Stop Time pad. Indicator words STOP TIMEwill flash in the display and the calculated stop time willalso appear in the display.5. Press the appropriate number pads to enter the stop timeyou desire. (A stop time can only be accepted for later inthe day.)Example: If at 9:00 you set the oven to clean for threehours, the calculated stop time would be "12:00". Thedisplay will show:?ZI. t-u-iIt._. LJl_l LOCKSTOPTIME CLEANIf you want the stop time to be 1:00, press the number pads"1,0,0". Four seconds later the display will show 1:00 andthe indicator word DELAY.6. When the oven begins to clean, the clean icon (top andbottom bars) will come on. The indicator word DELAYwill go off.