Jenn-Air JGS8750ADB Service Manual

Also see for JGS8750ADB: User guide Installation manual Dimension Guide

Testing Procedures! WARNINGTo avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing,unless testing requires power and/or gas.©2005 Maytag Services 16022089 17Oven Control Testing ProceduresChanging factory set default options: 1. PressSetup Options and the desired pad simultaneously (see table).2. PressAutoset to change the option.3. Press any pad exceptCancel to accept the change.4. PressCancel to cancel the operation.Control Component Test Procedure ResultsEOC II Oven temperatureadjustmentPressBake pad and enter 550° F (288° C). Pressand holdBake pad until TEMP ADJ displays.PressAutoset pad to adjust oven in 5° F (-15° C)increments, from -35° F (-37° C) to 35° F (2° C).While increasing or decreasing oventemperature, this does not affect self-cleaning temperature.EOC II End-of-TimerReminder beepsPress Setup Options and the applicable timer pad(Timer 1 or Timer 2) simultaneously.Selects the number of beeps emittedwhen a timed bake cycle ends.EOC II Control Lock Press Setup Options and the Control Lock pad(also the 1 pad) simultaneously.Press Autoset to select option (enable ordisable). The timer, clock and oven lightare operational.EOC II Twelve Hour off/Sabbath modePress Setup Options and the 12 Hour Off pad(also the 2 pad) simultaneously.Disables the normal 12-hour shutoff,allowing the oven to operate indefinitely.EOC II Sound Level(Beeper Volume)Press Setup Options and the Sound Level pad(also the 3 pad) simultaneously.Press Autoset to select setting (I lowestthrough IIIIIIII 8 highest).EOC II 24-Hour Clock Press Setup Options and the 12/24 Hour Clockpad (also the 4 pad) simultaneously.Press Autoset to select option (12-hourtime or 24-hour time).EOC II Scroll Speed Press Setup Options and the Scroll Speed pad(also the 5 pad) simultaneously.Press Autoset to set speed of displayedmessages (slow, medium, fast).EOC II End-of-Cook-TimeSignalPress Setup Options and Cook Time Beeps pads(also the 6 pad) simultaneously.Press Autoset to set the number ofbeeps emitted at the end of a "clock-controlled" cook cycle.EOC II Temperature Display Press Setup Options and the Temp C/F pad (alsothe 7 pad) simultaneously.Press Autoset to select option(°F or °C).EOC II Language Display Press Setup Options and the Language pad (alsothe 8 pad) simultaneously.Press Autoset to select option(English, French or Spanish).EOC II Factory Default Press Setup Options and the Default pad (also the9 pad) simultaneously.Press Autoset to reset clock to factorysettings.EOC II Clock Display Press Setup Options and the Display On/Off pad(also the Clock pad) simultaneously.Press Autoset to select clock display (onor off).EOC II Test Access Press and hold Cancel and Broil pads for 3seconds at power up or within 5 minutes of powerup mode. See "Quick Test Mode."Allows access to each function fortesting purposes.