Jenn-Air JGS8750ADB Service Manual

Also see for JGS8750ADB: User guide Installation manual Dimension Guide

C – 4 16022089 ©2005 Maytag ServicesLP Conversion InstructionsBURNER HEADBURNER BASESURFACE BURNER HEADS ANDBURNER BASESS The surface burner heads are removable. The capportion of the head is porcelain and the port area isaluminum. Wash the burner heads in the sink with milddetergent and a plastic scrubber. For stubborn stains,clean with Cooktop Cleaning Creme (Part #20000001).S Check to be sure all ports are open. To open cloggedports, insert a straight pin directly into each port. Do notenlarge or distort the port.S The aluminum burner base is not removeable. Toclean, wipe with a damp cloth.S When replacing the burner heads, carefully align thetab on the burner base with the indentation in the head.The two pins will fit in the slots when the tab is alignedwith the indentation.NOTE: When burner heads are removed for cleaning, donot spill liquids through the holes in the burner base.HOW TO REMOVE RANGE FORCLEANING AND SERVICINGFollow these procedures to remove appliance forcleaning or servicing:1. Shut off gas supply to appliance.2. Disconnect electrical supply to appliance, if equipped.3. Disconnect gas supply tubing to appliance.4. Slide range forward to disengage range from theanti-tip bracket. (See page 5).5. Reverse procedure to reinstall. If gas line has beendisconnected, check for gas leaks after reconnection.NOTE: A qualified servicer should disconnect andreconnect the gas supply.6. To prevent range from accidentally tipping, range mustbe secured to the floor by sliding rear leveling leg intothe anti-tip bracket.SERVICE-PARTS INFORMA TIONWhen your range requires service or replacement parts,contact your dealer or authorized service agency. Pleasegive the complete model and serial numbers of the rangewhich is located on the range model number plate.

/ 44

Related manuals for Jenn-Air JGS8750ADB