5Cooktop ControlsThe touch-activated electronic controls offer a variety of heatsettings for optimal cooking results.Display Icon Function Description0 Zero The cooking area is activated.1–9 Power level The cooking area is onat this power level.Flashing U No pandetectedNo pan, or the pan isnot compatible.NOTE: A “U” and a “∩”indicates the bridging of thetwo elements. AlternatingUpside down U and 9 ifcookware is detected only rearcooking area (Bridge zone).HOT Hot SurfaceindicatorThe cooktop surface is hot.b PerformanceBoostThe Performance Boostfunction is on.U Keep Warm The Keep Warm function is on.| | Pause The cooktop zone is paused.A Auto Cooking The Automatic Cookingfunction is on.E Error message There is an electronic failure.L CooktopLockoutThe cooktop will be locked out,and the cooking areas cannotbe turned on by the cooktoptouch controls.To UseTo Turn On the Cooktop:1. Touch the Power keypad.The indicator light above the Power keypad will light up toindicate that both cooking areas are ready to be activated.Inactivity to the control for 10 seconds after the main powerhas been turned on will automatically turn off power to thecooktop.To Turn On a Surface Cooking Area (Front or Rear):1. Touch the On/Off keypad for the desired cooking area. Thiswill turn that cooking area on and the “On” indicator will lightup. The current power level will be indicated above the slider.2. Select a power level from “1” to “b” by touching or sliding onthe power slider. The power setting will appear in the cookingarea display as you move your finger up or down the slider.■ The power sliders consist of nine positions plus KeepWarm (U) and Performance Boost (b) positions.■ If the cooking area power level is at “0” for 10 seconds,the cooking area will automatically turn off.WARNINGFire HazardTurn off all controls when done cooking.Failure to do so can result in death or fire.ABCDCooktop AreaA. Left Rear cooking areaB. Left Front cooking areaC. Right Rear cooking areaD. Right Front cooking area