Jenn-Air Refrigerators User Instructions

Also see for Refrigerators: User instructions

5Connect to Refrigerator1. Create a service loop (minimum diameter of 2 ft [61 cm]) withthe copper tubing. Avoid kinks when coiling the coppertubing.2. Remove the plastic cap from water valve inlet port. Place acompression nut and sleeve on the copper tubing.3. Insert the end of the copper tubing into the water valve inletport. Shape tubing slightly so that the tubing feeds straightinto the port to avoid kinks.4. Slide the compression nut over the sleeve and screw into thewater valve inlet port.5. Using an adjustable wrench, hold the nut on the plastic waterline to keep it from moving. Then, with a second wrench turnthe compression nut on the copper tubing counterclockwiseto completely tighten. Do not overtighten.6. Check connection by pulling on copper tubing. Attach coppertubing to refrigerator cabinet with a “P” clamp. Turn on watersupply to refrigerator and check for leaks. Correct any leaks.Complete the Installation1. Plug into a grounded 3 prong outlet.NOTE: Allow 24 hours to produce the first batch of ice. Discardthe first three batches of ice produced. Allow 3 days to completelyfill the ice container.A. Plastic water tubingB. SleeveC. Compression nutD. Copper tubingA. “P” clampB. Plastic water lineC. Compression nutD. Copper tubingBACDBCDAElectrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove ground prong.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result in death,fire, or electrical shock.WARNING