Jenn-Air SCE4320 Use And Care Manual

To check START TIME before cooking begins: Hold in STARTTIME buttonuntil the words START TIME appear in the Display Window. The start time will bedisplayed briefly, then Display will return to time of day.To change START TIME before cooking begins:1. Hold in START TIME button until the words START TIME appear in the DisplayWindow.2. Turn SET dial to desired time.3. Push ENTER button twice to enter new start time and stop time previouslyprogrammed.To check STOP TIME: Hold in STOP TIME button until the words STOP TIMEappear in the Display Window. The stop time will be displayed briefly, then Display willreturn to on-going program.To change STOP TIME:1. Hold in STOP TIME button until the words STOP TIME appear in the DisplayWindow.2. Turn SET dial to desired time.3. Push ENTER button to enter stop time.To Cancel function programmed: Push CANCEL button twice to cancelfunction, during programmed time or after time has expired.NOTE: After clock-controlled baking, turn SELECTOR and TEMPERATURE knobs toOFF position.NOTE: Since food continues to cook if left in the oven, it is suggested that the clockcontrols be used primarily to start the oven when no one is in the kitchen.Provisions should be made to have the food removed as soon as the signal hassounded.NOTE: If more than 7 seconds elapses between holding in START TIME buttonor STOP TIME button and turning the SET dial, the display window willautomatically return to on-going program.NOTE: If morethan 1 minute elapses between turning SET dial to a new time andentering new START TIME and STOP TIME, the entire program will becancelled and display will return to time of day clock.19