Jenn-Air W10292391 Installation Instructions Manual

Contents

3ARMOIRE KIT SAFETYINSTALLATION REQUIREMENTSThe Armoire-Style Door Panel Kit for fully integrated Jenn-Airrefrigerators enables full-height custom door panels with ahidden top panel for the ultimate in integrated design.IMPORTANT:■ These instructions will guide you in preparing your built-inrefrigerator for an armoire installation. They are intended tosupplement the Installation Instructions provided with yourrefrigerator not replace them.■ These instructions are intended as a general guide only anddo not supersede any national or local codes in any way.Compliance with all local, state or national codes pertainingto this type of installation should be determined prior toinstallation.Tools and PartsAssemble the required tools and parts before starting installation.Read and follow the instructions provided with any of therequired tools listed here. Proper installation is your responsibility.Tools Needed:Parts Supplied with Armoire Kit:Parts Supplied with Refrigerator - Used in ArmoireInstallation:Parts Supplied with Refrigerator - Not Used in ArmoireInstallation (these parts can be discarded):You can be killed or seriously injured if you don't immediatelyYou can be killed or seriously injured if you don't followAll safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what canhappen if the instructions are not followed.Your safety and the safety of others are very important.We have provided many important safety messages in this manual and on your appliance. Always read and obey all safetymessages.This is the safety alert symbol.This symbol alerts you to potential hazards that can kill or hurt you and others.All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”These words mean:follow instructions.instructions.DANGERWARNING■ Cordless drill■ Drill bits■ Two adjustablewrenches■ Phillips screwdriver■ Small level■ Appliance dolly■ ³⁄₃₂" Hex key(panel kits only)■ ¹¹⁄₃₂" Nut driver■ ³⁄₈" and ¹⁄₂" Open-endwrenches■ ⁵⁄₃₂" and ³⁄₁₆" Hex key■ ¹⁄₄" and ⁵⁄₁₆" Socketdrivers■ Tape measure■ Utility knife■ Tape (painters)■ Grille Assembly ■ Grille Bracket Assembly■ Instructions■ All hardware■ Drawer panel bracket■ Panel top bracket■ Hinge cover trim (RC and FC)■ Side trim■ Handle side door trim■ Installation block■ Panel templates■ Standard grille bracket ■ “L” brackets■ Integrated grille bracket ■ Grille trim