8MODIFICATIONS FOR AN ARMOIRE KIT INSTALLATIONTop Grille1. Remove the three screws fastening each mounting plate tothe top of the refrigerator on each side. Discard the mountingplates but keep the screws for attaching the two grille bracketassemblies provided in this kit.2. Remove the two screws fastening the air divider to the unithousing. Discard the air divider, but replace the screws intothe holes from where they were removed.3. Align the three holes in a grille bracket assembly with thethree holes in a cabinet side, as shown. Using the screwsremoved in Step 1, attach the grille bracket assembly.4. Repeat steps 2 and 3 to install the other grille bracketassembly to the opposite side of the refrigerator.Install RefrigeratorIMPORTANT: Follow the “Installation Instructions” in the“Installation Guide” provided with your refrigerator.1. Plug refrigerator into grounded 3 prong outlet.2. Move the refrigerator to its final location.Install Grille Panel1. Position the armoire grille panel between the grille bracketson each side of the cabinet.2. Slide the grille panel down until the top of the grille panelhangs on top of the offsets of the grille brackets.A. Grille bracket mounting plateB. Air dividerC. Grille bracket mounting plateA. Grille bracket assemblyB. ScrewsABCABA. Offset in bracketB. GrilleC. Grille bracketD. Grille bracket assemblyWARNINGTip Over HazardRefrigerator is top heavy and tips easily when notcompletely installed.Keep doors taped closed until refrigerator iscompletely installed.Use two or more people to move and installrefrigerator.Failure to do so can result in death or serious injury.BDAC