Jensen MP1313 Owner's Manual
Also see for MP1313: Installation guide
                                                                 | |
Contents
|
18SPECIFICATIONSCEA Power RatingsPower output: 13 watts RMS X 4 channels into4-ohms @ < 1% THD+NSignal to noise ratio: 70dBA below reference.(Reference: 1 watt, 4-ohms)Frequency response: 20Hz to 20kHz (-3dB),Auxiliary input used as source referenceReference supply voltage: 14.4VDCCD PlayerSignal-to-noise ratio: >90dBAFrequency response: 20Hz-20kHz, -3dBChannel separation: >55dB @ 1kHzD/A converter: 1 Bit/CHFM TunerTuning range (USA): 87.5MHz - 107.9MHzTuning range (Europe): 87.50MHz-108.00MHzMono sensitivity: 12dBf50dB quieting sensitivity (stereo): 16dBfStereo separation @ 1kHz: >35dBFrequency response: 30Hz-14kHz. +3dBAM TunerTuning range (USA): 530 kHz - 1710 kHzTuning range (Europe): 522kHz-1620kHzSensitivity @ 20dB signal to noise: 30uVFrequency response: 50Hz-2kHz., -3dBAuxiliary InputInput sensitivity: 400mV RMS for 1 watt RMSinto 4-ohmsFrequency response: 20Hz to 20kHz, -3dBInput impedance: 10 k-ohmsGeneralPower supply: 11-16 VDC, negative groundPower Antenna (Blue): 500mAmp Max, currentlimited protection.Operating Temp: -10C~60CFuses: 15 amp fast blow ATODIN chassis dimensions: 2"H x 7"W x 7"D(51mm x 178mm x 178mm)Specifications subject to change withoutnotice.MP1313 |
Related manuals for Jensen MP1313
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine