Jensen Twin-Servo 500 series User Manual

Contents

Radial Engineering Ltd. Jensen Twin-Servo 500 ™ ModuleTrue to the Music®113456278FeaTure SeT1. 10 SeGMeNT MeTer: Custom designed cir-cuit for greater VU meter accuracy.2. GaiN CoNTrol: Dual gang pot simultane-ously controls the dual 990 op-amp topologyfor optimal gain at all settings.3. 180°: Reverses pins-2 and 3 at the output tohelp phase align microphones when two chan-nels are in stereo use.4. HiGH PaSS FilTer (HPF): Gentle high-passfilter may be inserted into the signal path toreduce excessive low frequency content andcontrol resonance.5. PaD: Reduces the input sensitivity by -15dBwhen amplifying exceedingly high outputsources.6. 48V: Activates the 48V phantom power supplyfor use with condenser microphones and ac-tive direct boxes.7. CoMBo iNPuT: Combination balanced XLRmic input and 1/4” instrument input is mountedon front panel for ease of use.8. oMNiPorT: Available when used with theRadial Workhorse, the Omniport accesses ahi-Z instrument input.9. JeNSeN Dual 990 oPaMPS: 100% discreteaudio signal path without any tone shifting ca-pacitors.10. JeNSeN ouTPuT TraNSForMer: The JT-11-EM is linear from 2Hz~200kHz with lessthan 0.001% distortion at 20Hz.11. GrouND liFT: Set and forget rear panelground switch lifts the pin-1 ground at the XLRinput.12. JeNSeN MiC iNPuT TraNSForMer: TheJT-16-PCJR is exceptionally quiet and linearfrom 5Hz~50kHz with less than 0.06% distor-tion at 20Hz.91210 11