VM80128TUNER OPERATIONSelect a BandPress the BAND button (3) to change between three FM and two AMbands. Each band stores up to six preset stations.TuningManual TuningPress the TUNE/TRACK >>| or |<< buttons (17) to move the radiofrequency number up or down one step.Seek TuningPress and hold the TUNE/TRACK >>| or |<< buttons (17) for more thanthree seconds to seek the next/previous station automatically.Preset StationsUp to six stations on each band can be stored as presets, which can thenbe instantly recalled by pressing the associated preset button (12). To storea station, turn the radio on and select the desired band and station. Pressand hold the desired preset button (numbered one through six on the faceof the radio) for more than two seconds. When stored, the preset numberwill appear in the display. The station is now stored and can be recalled bypressing the corresponding preset button. Repeat for the remaining fivepresets on the current band and for presets on the other four bands.Preset ScanPress the AS button (14) to scan and play each preset station for 5 secondseach. Press AS again to stop preset scan.Automatic Preset StorePress and hold the AS button (14) to select six strong stations and storethem in the current band using the AUTO PRESET feature. The radio willautomatically scan all bands and enter strong stations into the presetmemory positions. After entering the stations into memory, the unit willautomatically stop at each station for five seconds, allowing you to previeweach selection. When using the AUTO PRESET feature, the new stationsreplace any stations already stored in preset memory.NOTE: You can stop the AUTO PRESET function at any time bypressing the AS button again.20 21INTRPTRPTRDMLOUDST/MOLOC MUTEAS BANDDISPSRC123 654/STEREOFM1: 98.10 MHZ 3INDICATOREQUALIZERINDICATORLOUD SETTING INDICATORPRESET NUMBER