Jensen VM8012 Installation And Operation Manual

Also see for VM8012: Installation and operation manual

Contents

Jensen VM8012 Installation And Operation Manual Manual pdf 8 page image

VM80124FRONT PANEL RELEASEThe front panel release button (4) releases the mechanism that holds thefront panel to the chassis.Detaching the Front PanelTo detach the front panel, perform the following steps:1. Press the power button (2) to turn the unit off.2. Press the front panel release button to flip the panel down.3. Grasp the right side to release the front panel and then pull it at anangle to remove the right side from the chassis.4. Store the front panel it in the supplied carrying case to protect it from dirtand damage and take it with you to prevent theft.Re-attaching the Front PanelBefore re-attaching the front panel, make sure the electrical terminals onthe back of the panel are free of dust and dirt, as debris could causeintermittent operation or other malfunctions.To re-attach the front panel:1. With the panel laying flat (in the “open” position), insert the left side ofthe panel in place until correctly engaged.2. Gently press the right side of the panel until the mechanism locks it intoplace.3. Lift upward to close the panel.