Jensen VM8023HD Installation And Operation Manual

Also see for VM8023HD - DVD Receiver: Installation and operation manual

Jensen VM8023HD Installation And Operation Manual Manual pdf 22 page image

VM8023HD18SETUP MENUDuring disc play, press the SETUP button (4) on the remote control toaccess the SYSTEM SETUP menu.Use the , , or cursor buttons to choose between LANGUAGE,VIDEO, AUDIO, RATING or MISC setup options.Table 2: System Setup MenuLANGUAGE MENUOSD language English Select the appropriate on-screen language for theDVDEspanolSubtitle English Choose the language you would like subtitles toappear in (if available)FrenchSpanishPortugueseGermanOff Turn subtitles offDVD menu English Choose the language you would like DVD menuto appear in (if available)FrenchSpanishGermanPortugueseVIDEO MENUAspect Ratio 4:3 Image is presented with 4:3 aspect ratio.16:9 Image is presented in wide view with a 16:9aspect ratio.Video Format NTSC The color signals are output in the standard NTSCformat.PAL The color signals are output in the standard PALformat.SETUP MENU 01:02AMLanguage MenuLANGUAGE VIDEO AUDIORATING MISCAUTO The color signal output is switched automaticallybased on the current video input signal - NTSC orPAL.Smart Picture StandardBrightSoftAUDIO MENUAudio Menu English Select the appropriate audio language for theDVD.FrenchSpanishGermanPortugueseRATING MENUSet Password _ _ _ _ Enter a 4-digit password to activate the “Rating”feature. The original password is “0000” and mustbe entered before you can change the passwordto a different 4-digit code.Parental CTR 1 KID SAFE Select the appropriate rating level for the intendedaudience.You may override higher ratings by using yourpassword.2 G3 PG4 PG135 PG-R6 R7 NC-178 ADULTMISC MENUUse DefaultSettings Yes/No Select “Yes” to restore the factory default settings.Demo Run Demo Mode scrolls through the various sourcescreens, simulating activity on the display. “DemoMode” is discreetly displayed in yellow text (belowthe clock), to indicate the unit is in Demo Mode. Tostop Demo Mode, press and hold the SRC button.Auto Run On When “Demo Auto Run” is On, the unit willautomatically display Demo Mode when poweredon.Off When "Auto Run" is Off, you can select "Demo >Run" to start Demo Mode.Table 2: System Setup Menu