Jensen VM8023HD Installation And Operation Manual

Also see for VM8023HD - DVD Receiver: Installation and operation manual

Jensen VM8023HD Installation And Operation Manual Manual pdf 7 page image

VM8023HD3WIRINGIMPORTANT!The pink parking wire MUSTbe connected to the switchedside of the parking breakcircuit (the part that becomesgrounded when the brake isapplied).Fuse (15A)(Blue)(Yellow)PARKING(Yellow)(Yellow)VIDEO OUT 1VIDEO OUT 2SUB (Subwoofer) OUTR (Red)R (Red)L (White)L (White)PinkAmplifierREAR Line OutFRONT Line OutCAMERA INPurplePurple/BlackStripeGrayGray/BlackStripeWhite/BlackStripe White Green/BlackStripe GreenLeft Speaker(Front)Right Speaker(Front)Left Speaker(Rear)Right Speaker(Rear)BlueRedPower AntennaConnect to power antennaor amplifier. If not used,tape bare end of wire.Accessory/IgnitionConnect to existing radiowire or radio fuse.Yellow BlackSWC (Steering Wheel Control)Chassis GroundBattery) -( )(+Connect the black wire to the factory ground wire. If afactory ground wire is not provided, locate a clean,unpainted metal part of the dash and secure the ground wirewith a "ring" terminal and a sheet metal screw.Connect the yellow wire to the battery or12 volt power source that is always live.This wire MUST be connected for theradio to work.FILTERBOXiPod(Sold Separately)FRONT REAR(Requires PAC SWI-PS Interface Adapter)CAMERA (Active High Level Input) + (Green/White)SAT BUSIPOD BUSSatellite Radio Tuner(sold separately)JXMC or XMDJEN100 Cables(sold separately)jLink/jLink iPod Cable(Included)SAT R (Red)SAT L (White)2NOTE: The amplifier in this radio is only designed for use with fourspeakers. Never combine (bridge) outputs for use with twospeakers. Never ground negative speaker leads to chassis ground.NOTE: Only connect speakers with a nominal impedanceof 4 ohms. Speakers with a load impedance less than 4ohms could damage the unit.