Jensen VM9411 Instruction Manual

Also see for VM9411: Instruction manual Instruction manual

Contents

13VM9411USING THE TFT MONITOROpen/Close TFT MonitorOpen TFT MonitorPress the OPEN button (1) on the front panel or press the( ) button (25) of the front zone remote control to activatethe mechanism that moves the display panel into the viewingposition.Close TFT MonitorPress the OPEN button (1) on the front panel or press the( ) button (25) of the front zone remote control to load thedisplay panel back into the compartment.TFT Monitor Auto OpenIf “TFT Auto Open” is “on” when the unit is turned on, themonitor automatically moves to the viewing position.If “TFT Auto Open” is ”off” when the unit is turned on, pressthe OPEN button (1) or ( ) button (25) on the front zoneremote control to move the monitor into the viewing position.If “TFT Auto Open” is set to ”Manual”, the TFT will not closewhen the key is turned off.Reverse Driving UseIf the rear-view video camera is connected, the unit is on, andthe monitor is stationed inside the main compartment of theunit, the monitor automatically moves into the viewingposition and switches to CAMERA mode upon reversedriving. When the reverse driving stops, the monitor returnsto the main storage compartment.If the monitor is in display mode, the monitor automaticallyswitches to CAMERA mode upon reverse driving. When thereverse driving stops, the monitor return to its original inputmode.Monitor Tilt Angle AdjustmentA known characteristic of LCD panels is the quality of thedisplay in relationship to the viewing angle. The monitorangle can be adjusted for optimum viewing using one of thefollowing methods:Step by Step Angle AdjustmentPress the ( ) or ( ) button (3, 4) on the monitor frame toadjust the tilt angle of the screen one step at a time.Continuous Angle AdjustmentPress and hold the ( ) or ( ) button (3, 4) on the monitorframe to adjust the tilt angle in a continuous motion.Aspect RatioPress the WIDE button (28) on the remote control or /PICTURE button (2) on the monitor to adjust the aspect ratioas follows:Image SettingTable 3 shows the video output mode for each playingsource.*CVBS – Composite Video Baseband SignalAdjustable ParametersWhile in DVD or TUNER mode, the only parameter that canbe adjusted is brightness (BRIGHT). To access “PICTURE”,“COLOR”, “CONTRAST”, and “TINT” you must be in AUX,CAMERA or TV Tuner mode.NOTE: The default adjustment is “0” in PAL mode. Tint isunavailable for adjustment.Parameter Adjustment Procedure1. Enter Picture Quality Setting mode:Press the PIC button (24) on the remote or press andhold the /PICTURE button (2) on the monitor panel.2. Select Item to Set:Press the (>>) (<<) buttons (14, 22) on the remote orpress and hold the (/\) or (V) buttons (18, 19) on themonitor panel.3. Set Parameters:Press (|<<) (>>|) buttons (17, 19) on the remote or press(<) (>) buttons (16, 17) on the monitor panel.4. Exit Picture Quality Setting Mode:Press the PIC button (24) on the remote or press andhold the /PICTURE button (2) on the monitor panel.Parking BrakeParking Brake InhibitWhen the pink "Parking" wire is connected to the vehiclebrake switch, the front TFT monitor will display video onlywhen the parking brake sequence is engaged. Before startingthe parking brake sequence, the radio must be on with thevideo media disc inserted and playing.Parking Brake SequenceThere are two situations that can start the Parking BrakeSequence:• Parking brake is engaged (on) when the vehicle is startedor the accessory/ignition is turned on. To activate video,the following sequence of events must be completed:a. Release parking brake for 2 seconds.b. Reapply the parking brake for 2 seconds.c. Video should be displayed on the TFT monitor within 1~ 2 seconds.• Parking break is disengaged (off) when the vehicle isstarted or the accessory/ignition is turned on. To activatevideo, the following sequence of events must becompleted:a. Set parking brake for 2 seconds.b. Release parking brake for 2 seconds.c. Reapply parking brake.d. Video should be displayed on the TFT monitor within 1~ 2 seconds.Table 3: Video Output ModesPlaying Source Video Output ModesAM/FM TUNER RGB ModeXM TUNER RGB ModeiPod RGB ModeDVD RGB ModeAUX IN CVBS ModeCAMERA CVBS ModeCINEMAThe entire screen is extendedhorizontally to the aspect ratio of 16 to9. The extension ratio is the same atany point.WIDEThe screen is extended horizontally tothe aspect ratio of 16 to 9. Theextension ratio increases toward theright and left ends of the screen.NORMALThe conventional display image has a4 to 3 ratio of horizontal to vertical,leaving a blank area on the right andleft sides of the display.OFF