Jensen XA4150 Owner's Manual

Also see for XA4150: Install and operation instructions How to install and operate

Contents

Jensen XA4150 Owner's Manual Manual pdf 10 page image

10®XA4150Professional TipCrimp ConnectionsPurchase crimp connectors and crimpingtool. Connectors are color coded.1. Strip 1/4 inch (6mm) of insulation fromboth wires.2. Insert into connector.3. Crimp tightly.You can make permanent splices (using buttconnectors) or select connectors that can beremoved and reinstalled.321Strip wire1/4" (6mm)Speaker and Power WiresDo not run speaker and power wires next toeach other. Power wires can generate a“siren” sound in the speakers. Run speakerand power wires on opposite sides of the car.Professional TipProfessional TipSecuring WiresBe proud of your installation! Use wire ties tobundle wires together when possible. (Butnever bundle speaker wires and power wirestogether!)Secure loose wires to the vehicle to makesure they don’t rub or rattle.Installing in TrunkWhen installing the amplifier in the trunk, runthe power wires along the same path as theother vehicle wiring. Many cars have insulatedchannels for wiring. You will have to removethe door sill trim and the carpet.Professional Tip5314Eamp.p65 4/10/99, 7:08 PM10

/ 12

Related manuals for Jensen XA4150