Jet JDP-15M Operating Instructions And Parts Manual

Also see for JDP-15M: Operating instructions Operating instructions Operating instructions and parts manual

520. Keep visitors a safe distance from the work area. Keep children away.21. Make your workshop child proof with padlocks, master switches or by removing starter keys.22. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” arecareless acts that can result in serious injury.23. Maintain a balanced stance at all times so that you do not fall or lean against the spindle or othermoving parts. Do not overreach or use excessive force to perform any machine operation.24. Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job forwhich it was not designed. The right tool will do the job better and safer.25. Use recommended accessories; improper accessories may be hazardous.26. Maintain tools with care. Keep drill bits sharp and clean for the best and safest performance. Followinstructions for lubricating and changing accessories.27. Make sure the work piece is securely attached or clamped to the table. Never use your hand to holdthe work piece.28. Turn off the machine before cleaning. Use a brush or compressed air to remove chips or debris — donot use your hands.29. Do not stand on the machine. Serious injury could occur if the machine tips over.30. Never leave the machine running unattended. Turn the power off and do not leave the machine until itcomes to a complete stop.31. Remove loose items and unnecessary work pieces from the area before starting the machine.Familiarize yourself with the following safety notices used in this manual:This means that if precautions are not heeded, it may result in minor injury and/orpossible machine damage.This means that if precautions are not heeded, it may result in serious injury or possiblyeven death.- - SAVE THESE INSTRUCTIONS - -