Jet JJP-8BT Operating Instructions And Parts Manual

Also see for JJP-8BT: Specifications Operating instructions and parts manual

2216.3 Mechanical Troubleshooting – Planer/JointerTrouble Probable Cause RemedyMachine willnot start/restart orrepeatedlytrips circuitbreaker orblows fuses.No incomingpower.1. Verify unit is connected to power and Start/Stop switch is in theStart position (see sect. 10.1, Power).2. Verify unit is connected to power. Set the Start/Stop switch to theStop position, depress and release the reset switch, then reset theStart/Stop switch to the Start position (see sect. 10.1, Power).Planer frequentlytrips.One cause of overloading trips, which are not electrical in nature, istoo heavy a cut. The solution is to take a lighter cut.Building circuitbreaker trips orfuse blows.Verify that planer is on a circuit of correct size. If circuit size iscorrect, there is probably a loose electrical lead.Motor failure. If electric motor is suspect, have a qualified electrician test the motorfor function or take the machine to a service center and have ittested.Dust chute notseated properly oneither JointerInfeed or PlanerTableAdjust the dust chute, making sure that the key on the dust chutedepresses the micro-switch on machine.17.0 Replacement PartsReplacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and SerialNumber of your machine available when you call will allow us to serve you quickly and accurately.