Jet JMS-8 Operating Instructions Manual
3GB - ENGLISHOperating InstructionsDear Customer,Many thanks for the confidence you have shown in us with the purchase of your new JET-machine. This manual has beenprepared for the owner and operators of a JET JMS-8 mitre saw to promote safety during installation, operation andmaintenance procedures. Please read and understand the information contained in these operating instructions and theaccompanying documents. To obtain maximum life and efficiency from your machine, and to use the machine safely, readthis manual thoroughly and follow instructions carefully.…Table of Contents1. Declaration of conformity2. Warranty3. SafetyAuthorized useGeneral safety notesRemaining hazards4. Machine specificationsTechnical dataNoise emissionContents of delivery5. Transport and start upTransport and installationAssemblyMains connectionStarting operation6. Machine operation7. Setup and adjustmentsChanging the sawbladeLaser adjustment8. Maintenance and inspection9. Troubleshooting10. Environmental protection11. Available accessories1. Declaration of conformityOn our own responsibility we herebydeclare that this product complieswith the regulations* listed on page 2.Designed in consideration with thestandards**.2. WarrantyThe Seller guarantees that thesupplied product is free from materialdefects and manufacturing faults.This warranty does not cover anydefects which are caused, eitherdirectly or indirectly, by incorrect use,carelessness, accidental damage,repair, inadequate maintenance orcleaning and normal wear and tear.Guarantee and/or warranty claimsmust be made within twelve monthsfrom the date of purchase (date ofinvoice). Any further claims shall beexcluded.This warranty includes all guaranteeobligations of the Seller and replacesall previous declarations andagreements concerning warranties.The warranty period is valid for eighthours of daily use. If this is exceeded,the warranty period shall be reducedin proportion to the excess use, but tono less than three months.Returning rejected goods requires theprior express consent of the Sellerand is at the Buyer’s risk andexpense.Further warranty details can be foundin the General Terms and Conditions(GTC). The GTC can be viewed atwww.jettools.com or can be sent bypost upon request.The Seller reserves the right to makechanges to the product andaccessories at any time.3. Safety3.1 Authorized useThis machine is designed for sawingwood, wood derived materials as wellas similar to be machined hardplastics only.Machining of other materials is notpermitted and may be carried out inspecific cases only after consultingwith the manufacturer.No metal workpieces may bemachined.For machining, the workpiece mustallow to safely be loaded andsupported.The proper use also includescompliance with the operating andmaintenance instructions given in thismanual.The machine must be operated onlyby persons familiar with its operationand maintenance and who arefamiliar with its hazards.The required minimum age must beobserved.The machine must only be used in atechnically perfect condition.When working on the machine, allsafety mechanisms and covers mustbe mounted.In addition to the safety requirementscontained in these operatinginstructions and your country’sapplicable regulations, you shouldobserve the generally recognizedtechnical rules concerning theoperation of woodworking machines.Any other use exceeds authorization.In the event of unauthorized use ofthe machine, the manufacturerrenounces all liability and theresponsibility is transferredexclusively to the operator.3.2 General safety notesWoodworking machines can bedangerous if not used properly.Therefore the appropriate generaltechnical rules as well as thefollowing notes must be observed.Read and understand the entireinstruction manual before attemptingassembly or operation.Keep this operating instruction closeby the machine, protected from dirtand humidity, and pass it over to thenew owner if you part with the tool.No changes to the machine may bemade.Daily inspect the function andexistence of the safety appliancesbefore you start the machine.Do not attempt operation in this case,protect the machine by unpluggingthe mains cord.Do not lock the moving guard in theopen position. Ensure that themovable guards operate freelywithout jamming.Remove all loose clothing andconfine long hair.Before operating the machine,remove tie, rings, watches, otherjewellery, and roll up sleeves abovethe elbows.Wear safety shoes; never wearleisure shoes or sandals. |
Related manuals for Jet JMS-8
Jet JMS-10 Operating Instructions Manual
Jet JMS-10S Operating Instructions Manual
Jet JSMS-10L Operating Instructions Manual
Jet JSMS-10L Operating Instructions Manual
Jet JTS-10 Operating Instructions Manual
Jet JSS-16 Operating Instructions Manual
Jet JBS-12 Operating Instructions Manual
Jet JSS-18 Operating Instructions Manual
Jet J-7060 Operating Instructions Manual
Jet JBS-12 Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine