Jet JTS-8 Operating Instructions Manual

Contents

Jet JTS-8 Operating Instructions Manual Manual pdf 1 page image

3GB - ENGLISHOperating InstructionsDear Customer,Many thanks for the confidence you have shown in us with the purchase of your new JET-machine. This manual has beenprepared for the owner and operators of a JET JTS-8 table saw to promote safety during installation, operation andmaintenance procedures. Please read and understand the information contained in these operating instructions and theaccompanying documents. To obtain maximum life and efficiency from your machine, and to use the machine safely, readthis manual thoroughly and follow instructions carefully.…Table of Contents1. Declaration of conformity2. Warranty3. SafetyAuthorized useGeneral safety notesRemaining hazards4. Machine specificationsTechnical dataNoise emissionContents of deliveryDescription of machine5. Transport and start upTransport and installationAssemblyDust connectionMains connectionStarting operation6. Machine operation7. Setup and adjustmentsChanging saw bladeMounting the raving knifeMounting the saw guardRising and tilting sawbladeRip fence setupMitre gauge setup8. Maintenance and inspection9. Troubleshooting10. Environmental protection11. Available accessories12. „Safe operation”........ appendix A1. Declaration of conformityOn our own responsibility wehereby declare that this productcomplies with the regulations* listedon page 2.Designed in consideration with thestandards**. CE typeexamination*** performed by****.2. WarrantyThe Seller guarantees that thesupplied product is free frommaterial defects and manufacturingfaults. This warranty does not coverany defects which are caused,either directly or indirectly, byincorrect use, carelessness,accidental damage, repair,inadequate maintenance orcleaning and normal wear and tear.Guarantee and/or warranty claimsmust be made within twelve monthsfrom the date of purchase (date ofinvoice). Any further claims shall beexcluded.This warranty includes all guaranteeobligations of the Seller andreplaces all previous declarationsand agreements concerningwarranties.The warranty period is valid foreight hours of daily use. If this isexceeded, the warranty period shallbe reduced in proportion to theexcess use, but to no less thanthree months.Returning rejected goods requiresthe prior express consent of theSeller and is at the Buyer’s risk andexpense.Further warranty details can befound in the General Terms andConditions (GTC). The GTC can beviewed at www.jettools.com or canbe sent by post upon request.The Seller reserves the right tomake changes to the product andaccessories at any time.3. Safety3.1 Authorized useThis machine is designed forsawing wood, wood derivedmaterials as well as similar to bemachined hard plastics only.Machining of other materials is notpermitted and may be carried out inspecific cases only after consultingwith the manufacturer.No metal work pieces may bemachined.The workpiece must allow to safelybe loaded, supported and guided.The proper use also includescompliance with the operating andmaintenance instructions given inthis manual.The machine must be operated onlyby persons familiar with itsoperation, maintenance and repairand who are familiar with itshazards.The required minimum age must beobservedThe machine must only be used ina technically perfect condition.When working on the machine, allsafety mechanisms and coversmust be mounted.In addition to the safetyrequirements contained in thisoperating instructions and yourcountry’s applicable regulations,you should observe the generallyrecognized technical rulesconcerning the operation ofwoodworking machines.Any other use exceedsauthorization.In the event of unauthorized use ofthe machine, the manufacturerrenounces all liability and theresponsibility is transferredexclusively to the operator.3.2 General safety notesWoodworking machines can bedangerous if not used properly.Therefore the appropriate generaltechnical rules as well as thefollowing notes must be observed.