528. Maintain a balanced stance at all times so thatyou do not fall or lean against the cutter orother moving parts. Do not overreach or useexcessive force to perform any machineoperation.29. Use the right tool at the correct speed andfeed rate. Rotate spindle clockwise for right-hand tools, counterclockwise for left-handtools. Do not force a tool or attachment to do ajob for which it was not designed. The righttool will do the job better and more safely.30. Use recommended accessories; improperaccessories may be hazardous.31. Frequently clean this machine. Maintain toolswith care. Keep cutters sharp and clean for thebest and safest performance. Followinstructions for lubricating and changingaccessories.32. Turn off the machine before cleaning. Use abrush or compressed air to remove chips ordebris — do not use your hands.33. Do not stand on the machine. Serious injurycould occur if the machine tips over.34. Never leave the machine running unattended.Turn the power off and do not leave themachine until it comes to a complete stop.35. Remove loose items and unnecessary workpieces from the area before starting themachine.36. Don’t use in dangerous environment. Don’tuse this machine in damp or wet locations, orexpose it to rain. Keep work area well lighted.37. Some coolants used for machining containchemicals that may be hazardous to yourhealth if not used properly. Read andunderstand all user information listed on thecoolant container and protect yourselfaccordingly.Familiarize yourself with the following safety notices used in this manual:This means that if precautions are not heeded, it may result in minor injury and/or possiblemachine damage.This means that if precautions are not heeded, it may result in serious, or possibly even fatal,injury.4.0 About this manualThis manual is provided by JET, covering the safe operation and maintenance procedures for a JET ModelJVM-836 Turret Mill. This manual contains instructions on installation, safety precautions, general operatingprocedures, maintenance instructions and parts breakdown. Your machine has been designed and constructedto provide consistent, long-term operation if used in accordance with the instructions set forth in this document.If there are questions or comments, please contact your local supplier or JET. JET can also be reached at ourweb site: www.jettools.com.Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.Read and understand the entire contents of this manual before attempting assemblyor operation! Failure to comply may cause serious injury!