Jet JWBS-14SFX Operating Instructions And Parts Manual

Jet JWBS-14SFX Operating Instructions And Parts Manual Manual pdf 7 page image

7Table, fence, miter gaugeTable dimensions L x W 21-1/2 x 17 in. (535 x 435 mm)Table tilt 45° RightTable height from floor 40 in. (1020 mm)Miter T-slot (2), W x D 3/4 x 13/32 in. (19 x 10 mm)Resaw fence size L x W x H 18-1/4 x 6 in. (463 x 155 mm)Miter gauge angle range 60° R and LMiter gauge positive stops 0, 45°R, 45°LGeneral dimensionsOverall dimensions, assembled L x W x H (approx.) 37 x 27-1/2 x 75-3/8 in. (940 x 700 x 1915 mm)Shipping dimensions – saw only; L x W x H (approx.) 63-3/4 x 27 x 20 in. (1620 x 685 x 510 mm)Base (Footprint) L x W 24.8 x 17-3/4 in. (630 x 450 mm)WeightsNet weight (approx.) 300 lb. (135 kg)Shipping weight (approx.) 325 lb. (146 kg)1 Subject to local/national electrical codes.2 The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplaceconditions vary, this information is intended to allow the user to make a better estimation of the hazards and risksinvolved only.L = length, W = width, H = height, D = depthThe specifications in this manual were current at time of publication, but because of our policy of continuousimprovement, JET reserves the right to change specifications at any time and without prior notice, without incurringobligations.4.1 Base Hole CentersFigure 4-1: base hole centers