Jet ProMac FX-383V Operating Instructions Manual

FX-383V5. Transport and start up5.1 Transport and installationThe machine will be delivered in a closed crate.For transport use a forklift or hand trolley. Make sure themachine does not tip or fall off during transport.The machine is designed to operate in closed rooms andmust be bolted to the cabinet stand or a solid work bench.Make sure the machine cannot tip!For packing reasons the machine is not completelyassembled.5.2 AssemblyIf you notice transport damage while unpacking, notify yoursupplier immediately. Do not operate the machine!Dispose of the packing in an environmentally friendly manner.Clean all rust protected surfaces with petroleum, diesel oil ora mild solvent.Fig 9Caution:The machine is heavy (280 kg)!Assure the sufficient load capacity and proper conditionof your lifting devices.Never step underneath suspended loads.Remove the fixing bolts of the machine.Positioning the MachineCheck to see if the head is secured to the column with Headlocking handle (A).WARNING:Failure to lock the machine head may result in machinedamage or personal injury.Position a belt (with a load capacity of approximate 280kgs)at two points (J) to lift the machine.The head of the machine can be rotated 360o, so choose alocation with enough space and solid foundation.Assembling Loose PartsAdd the hand wheels(A) to the cross table. Secure in place bytighten the set screw with an allen #3 wrench.Add the quill feed levers (B) to the quill feed shaft head andtighten down with a wrench.Add Riser handle (C) to the shaft. Secure it in place bytighten the set screw with an allen #5 wrenchCoolant nozzle (D, come with an optional coolant system)Optional coolant system comes with the machine, the nozzlewould be installed ready on machine.5.3 Mains connectionMains connection and any extension cords used must complywith applicable regulations.The mains voltage must comply with the information on themachine licence plate.The mains connection must have a 10 A surge-proof fuse.Only use power cords marked H07RN-F.