Kärcher BD 40/12 C Bp Pack Service Manual

4 5.906-510.0 Rev. 00 (12/10)Good service work requires extensive and practice-oriented training as well as well-structured trainingmaterials.Hence we offer regular basic and advanced trainingprogrammes covering the entire product range for allservice engineers.In addition to this, we also prepare service manualsfor important appliances - these can be initially usedas instruction guides and later on as referenceguides.Apart from this, we also regular information aboutproduct enhancements and their servicing.If you should require supplements, have correctionsor questions regarding this document, please ad-dress these citing the following subject to:international-service@de.kaercher.comThe responsible product specialist will take care ofyour issue.Copying and duplication of texts and diagrams aswell as third-party access to this information is per-mitted only with the explicit permission of the compa-ny:Alfred Kärcher GmbH & Co. KGP O Box 160D - 71349 Winnendenwww.kaercher.comSafety devices serve to protect the user and must notbe rendered inoperational or their functions by-passed.The appliance may only be operated if all covers areclosed.To put all functions out of operation immediately.NoteIndicates useful tips and important information aboutthe product.First pull out the plug from the mains before carryingout any tasks on the machine.After completing the maintenace work, check all safe-ty and protective devices for correct installation andproper function.The scrubbing vacuum cleaner is used for the wetcleaning of level floors.It can be easily adjusted to the cleaning task by set-ting the water quantity.A working width of 385 mm and a capacity of 12 leach of the fresh and dirt water reservoirs enable aneffective cleaning even when the machine is used forlong duration.The batteries can be charged using a charger con-nected to a 230 V socket.Once the brush head is turned on at the control panel,the functions "Vacuum" and/or "Feed water" are pos-sible.– Fresh water and wastewater reservoirs have dif-ferent designs (wastewater reservoir can be re-moved).– Mechanical swimmer closes the suction openingin the cover if the wastewater foams excessivelyor if the wastewater reservoir is full.– Brush head must be turned on and the operatinglever for the brush head must be activated for thesolenoid valve (see water function diagram) toopen.– The fresh water amount can be regulated with astopcock according to the contamination level.1 PrefaceSubject: Case1107802 Safety instructions2.1 Safety Devices2.1.1 Emergency-stop button2.2 Hazard levels2.3 General notes on safety3 Technical Features3.1 Brush system3.2 Water System