Unit functions BR/BD 100/250 R BP / RIPage 52 / 171 Service Manual 08.20073.2 Operator and service program overviewOperator functions:The overview describes the operator functionswith the corresponding processes and accessto the information menu. The manufacture set-tings for the operator functions are shown in thechart. Further details are given in Chapter 3.3.9.Service program overviewThe service mode is available for the customerservice technicians to use for troubleshootingand adjusting work.The service mode consists of the testing modeand the setup menu.The service diagnosis function is not yet availa-ble and will be introduced at a later date.Rotary functionKeying functionInching functionNote:Access by selecting the menu items takesplace using the information button.The info button symbols used (see figure):Rotary function: for selecting the menu.Key function: for confirming themenu selection.Inching function: for fine adjustment(e.g. limit switch).Manufacture settings (see also Chapter 3.3.9)Info button with functionsProgram switch (S9)Items 1-71 Driving(without cleaning function)Water volumeCleaning agent meteringBrush pressureScrubbing performance / speedBrush after-running time (s)Working speed– – – – – –2 Wet scrubbing(with suction)5 0 4 6 2 43 Wet scrubbing(without suction)5 0 4 6 2 44 Suction(without scrubbing mode)– – – – – 45 Polishing(without suction)– – 4 6 0 46 Polishing(with suction)– – 4 6 0 47 Hand cleaning(without drive function)with wall-ceiling-floor tool– – – – – –
