Kärcher HD 2.3/15 C Ed Manual

Also see for HD 2.3/15 C Ed: Manual User manual

Contents

Kärcher HD 2.3/15 C Ed Manual Manual pdf 6 page image

English7Protection of theenvironment, disposalThe packaging material can berecycled. Please do not place thepackaging into the ordinary refu-se for disposal, but arrange forthe proper recycling.Old appliances contain valuablematerials that can be recycled.Please arrange for the proper re-cycling of old appliances. Batte-ries, oil, and similar substancesmust not enter the environment.Please dispose of your old ap-pliances using appropriate col-lection systems.Preparing the unit for useUnpack the unit– When unpacking the unit, check the con-tents of the packaging. If there has beenany damage in transit inform the dealer.– Do not dispose of the packaging with thehousehold rubbish, hand it in at the appro-priate collection point for recycling.Check the oil level Read the oil level displayed while unit is ata standstill. The oil level must be above thetwo indicators.Activate the oil reservoir vent Unscrew the fastening screw of the hoodand remove the hood. Cut off the tip on the cover to the oil reservoir. Fasten the unit cover.Mount the accessories Mount nozzle on the spray lance (seemarkings on the top of the setting ring). Fit the spray lance to the hand-held spray gun.For appliances without hose reel: Undo push-handle clamps. Adjust push-handle to required height. Tighten push-handle clamps. Screw on high-pressure hose to the high-pressure outlet.For appliances with hose reel: Insert the crank handle in the hose reelshaft, until it snaps into position. It is advisable to lay the high-pressure hoseout in a straight line before reeling it up. Wind the high-pressure hose up in even layerson the hose reel by turning the crank handle.Select the rotational direction so that the high-pressure hose does not kink.Switching on the unitElectrical connectionCaution!The voltage specified on the model rat-ing plate must correspond to the voltage sup-plied.Caution!Use an extension cable with a sufficientcable cross-section (see Technical Specifica-tions) and unwind it fully from the cable drum.For connected loads see model rating plate/Technical Specifications.Caution!It is essential that the unit is connectedto the power supply by means of a plug. An in-separable connection to the power supply isprohibited. The plug is used to disconnectfrom the mains.