Kärcher HD 3.0/27 G Operator's Manual

Also see for HD 3.0/27 G: Service manual Service manual Service manual Operator's manual Operator's manual

Contents

Kärcher HD 3.0/27 G Operator's Manual Manual pdf 9 page image

• 9.801-759.0 • Rev. 11/159PRESSURE WASHER OPERATOR’S MANUALSTEP 1: Check engine oil level. Oil level should be level with the bottomof the oil fi ller neck. Be sure the machine is level when checking the oillevel. (Refer to the engine's operating manual included with machine.)We recommend that the oil be changed after the fi rst 5 hours of use, thenonce every 50 hours. Note: Improper oil levels will cause low oil sensorto shut off engine. IMPORTANT! Do not run engine with high or lowoil levels as this will cause engine damage.STEP 2: Remove shipping cap andinstall oil dipstick. Check pump oillevel by using dipstick or observeoil level in oil window (if equipped).Use 40 wt. non detergent oil.STEP 4: Connect garden hoseto the cold water source and turnwater on completely. Never usehot water.STEP 6: Slide the fuel valve lever to the "ON" position.When the engine is not in use, leave the fuel valve inthe "OFF" position.STEP 5: Trigger the spray gun toeliminate trapped air then wait fora steady fl ow of water to emergefrom the spray nozzle.OPERATING INSTRUCTIONSSTEP 3: Fill gas tank with unleadedgasoline. Do not use leaded gaso-line.STEP 7: Move the choke lever to the "Choke" posi-tion (on a warm engine, leave the choke lever in therun position).Oil DipstickDipstickOil WindowGasTankColdWaterSourceGardenHoseChokeLeverFuelValveChokeOff OnChokeRunFuelValve