– 5Î Set the appliance switch to "0".Î Shut off water supply.Î Activate hand spray gun until device ispressure-less.Î Press the safety lever of the hand-spraygun to secure the lever of the pistolagainst being released accidentally.CautionFrost will destroy the not completely waterdrained device.The machine should be stored in frost-freerooms. In case there is frosting risk, for e.g.if the machine is installed in open areas,then the machine must first be emptied andflushed using an anti-freezing agent.vThe machine should be stored in frost-freerooms. In case there is frosting risk, for e.g.if the machine is installed in open areas,then the machine must first be emptied andflushed using an anti-freezing agent.vÎ Remove the water inlet hose on the ap-pliance.Î Unscrew the high pressure hose fromthe appliance.Î Let the appliance run till the pump andpipes are empty (max. 1 minute).Î If there are longer operational breaks,fill anti-freezing agent in the swimmertank and pump it through the appliance.Corrosion protection is achieved withthis as well.NoteUse normal glycol-based anti-freezingagents for automobiles.Observe handling instructions of the anti-freeze agent manufacturer.Î Operate device for max. 1 minute untilthe pump and conduits are empty.CautionRisk of injury and damage! Observe theweight of the appliance when you transport it.Î When transporting in vehicles, securethe appliance according to the guide-lines from slipping and tipping over.CautionRisk of injury and damage! Note the weightof the appliance in case of storage. DangerRisk of injury by inadvertent startup of ap-pliance and electrical shock.First pull out the plug from the mains beforecarrying out any tasks on the machine.NotePlease dispose off used oil only in the col-lection points provided for them. Pleasehand over old oil, if any, only at such plac-es. Polluting the environment with used oilis a punishable offence.You can sign with your dealer a contract forregular safety inspection or even sign amaintenance contract. Please take adviceon this matter.Î Check connection cable for damages(risk of electrical shock); get the dam-aged connection cable replaced imme-diately by an authorised customerservice person/ electrician.Î Check the high pressure hose for dam-ages (risk of bursting).Please arrange for the immediate ex-change of a damaged high-pressurehose.Î Check appliance (pump) for leaks.3 drops per minute are permitted andcan come out from the lower side of theappliance. Call Customer Service ifthere is heavy leakage.Turn off the appliance.Frost protectionEmptying the applianceTransportStorageMaintenance and careSafety inspection/ maintenancecontractBefore each use17EN