Kärcher HDS 13/24 PE Original Instructions Manual

Also see for HDS 13/24 PE: Manual

– 13– The water temperature limiter has beentriggered. Turn off the appliance. Press the reset button for the watertemperature limiter in the electrical box. Turn on the appliance.– The water temperature limiter has beentriggered repeatedly. Get the device checked by CustomerService.– Fuel tank empty Refill.– Water shortage Check water supply, check connec-tions, clean water shortage safeguard.– Fuel pump is defective Replace fuel pump (Customer Service).– Fuel filter dirty Change fuel filter.– No ignition spark If device is in use and no ignition sparkcan be seen through the viewing glas,have device checked by customer serv-ice.– Working pressure/flow rate to high Reduce working pressure/flow quantityat the pressure/quantity regulator.– Sooty heating spiral Have device de-sooted by customerservice.If malfunction can not be fixed, the de-vice must be checked by customer serv-ice.The warranty terms published by our com-petent sales company are applicable ineach country. We will repair potential fail-ures of the appliance within the warrantyperiod free of charge, provided that suchfailure is caused by faulty material or de-fects in fabrication.– Only use accessories and spare partswhich have been approved by the man-ufacturer. The exclusive use of originalaccessories and original spare partsensures that the appliance can be oper-ated safely and trouble free.– At the end of the operating instructionsyou will find a selected list of spare partsthat are often required.– For additional information about spareparts, please go to the Service sectionat www.kaercher.com.Burner does not startSet temperature is not achievedwhile using hot waterWarrantyAccessories and Spare Parts33EN