Kärcher HDS Super SX Operating Instructions Manual

Also see for HDS 1195 SX Eco: Operating instructions Instructions

Kärcher HDS Super SX Operating Instructions Manual Manual pdf 23 page image

Operating Instructions HDS Super SX/HDS 695 SX/HDS 895 SX/HDS 1195 SX English23Reference to operatinginstructionsAll of the item numbers described below inthe operating instructions are referenced inthe illustration of the unit.CommissioningWarning!Unit, piping, high-pressure hose andconnections must be in perfect workingorder!! Lock the hand brake.Checking oil levelFigure 1Warning!Immediately consult the Kärcher servicestation when oil turns milky!! If oil level is approaching MIN mark, fillup with oil as far as MAX mark.! Seal oil filler inlet.Refer to technical data for oil grade.Filling with scale inhibitorFigure 2(sample pack included with scope ofdelivery)Scale inhibitor stops heating coil becomingcalcified when using hard tap water. Is ismetered in at the inlet in the water reservoirone drop at a time.By the manufacturer metering is set to amean water hardness.! For other water hardnesses requestservices of a Kärcher service station andhave it adapted to local conditions.Filling with fuelWarning!Never operate unit with fuel tank empty!Fuel pump would otherwise be destroyed!Warning!Figure 3Only fill with diesel fuel or light fuel oil.It is forbidden to use unsuitable fuels,e.g. benzine (explosion hazard, damage tounit).! Close tank cap! Wipe off excess fuelFill with cleaning agent— Use only Kärcher products.— Never pour in solvent (petrol, acetone,thinner etc.)!— Avoid contact with eyes and skin— Pay attention to cleaning-agentmanufacturer's instructions on safetyand handlingKärcher offers a customised cleaningand care agent range.Your dealer will be pleased to advise you.