Kärcher K 2.400 Operating Instructions Manual

Also see for K 2.400: Manual Operating instructions

Contents

12 EnglishIllustrations see page 13The pipe cleaning kit is suitable for cleaningpipes and drains with dimensions as seenin the illustration . Danger Only trigger the high-pressure jet whenthe nozzle has been inserted into thepipe to be cleaned at least up to the redmarking. Never pull the inserted pipe cleaninghose out of the pipe to be cleaned anyfurther than the red mark during thehigh-pressure operation. In unfavourable conditions, the pipecleaning hose can change direction in-side the pipe and come back out of it.This risk grows with the diameter of thepipe to be cleaned. If this occurs, imme-diately release the lever of the handspray gun. If the cleaning operation has been com-pleted turn off the high-pressure clean-er and disconnect the pipe cleaner fromthe high-pressure gun. Warning This appliance is not intended for useby persons with reduced physical, sen-sory or mental capabilities.The appliance must not be operated bychildren or persons who have not beeninstructed accordingly.Children should be supervised to pre-vent them from playing with the appli-ance.Illustration Press the coupling of the pipe cleaninghose into the bayonet connection of thehigh-pressure gun. Turn the coupling part by 90° until itlocks into place.Illustration Insert the pipe cleaning hose into thepipe to be cleaned up to the red mark.Illustration Turn on the high-pressure cleaner.Illustration Press the lever of the hand spray gunand manually guide the pipe cleaninghose with the automatic advance.Note:If the pipe cleaner encounters a cloggedspot: Press the lever of the high-pressuregun repeatedly and release again.Repeat this cleaning process if neces-sary or with severe contamination! Pull the pipe cleaning hose out of thepipe up to the red mark with the highpressure cleaner running.Illustration Switch off the high pressure cleaner.Illustration Pull the pipe cleaning hose out of thepipe.Pipe cleaning kitProper useSafety instructionsApplication