Kärcher K 6.80 M Manual

Also see for K 6.85 M: Operating instructions Operator's manual User guide Assembly and user instructions Short instructions

Kärcher K 6.80 M Manual Manual pdf 15 page image

English 15Caution Observe a distance of at least 30 cmwhen using the jet to clean painted sur-faces to avoid damaging paintwork. Never leave the appliance unattendedwhen it is in operation. Make sure that the power cable or ex-tension cables are not damaged by run-ning over, pinching, dragging or similar.Protect the power cable from heat, oil,and sharp edges. All current-conducting parts in the work-ing area must be protected against jetwater. The appliance may only be connectedto an electrical supply which has beeninstalled in accordance with IEC 60364. The appliance may only be connectedto alternating current. The voltage mustcorrespond with the type plate on theappliance. The maximum tolerable mains imped-ance at the electrical contact point (seeTechnical Data) must not be exceeded. For safety reasons, we recommend thatyou operate the appliance only via aearth-leakage circuit breaker (max.30 mA). Cleaning operations which produce oilywaste water, e.g. engine washes, un-derbody washes, may only be carriedout using washing stations equippedwith an oil separator. This appliance was designed to beused with detergents which are sup-plied or recommended by the manufac-turer. The use of other detergents orchemicals may compromise the safetyof the appliance.CautionSafety devices protect the user and mustnot be modified or bypassed.The appliance switch prevents unintention-al operation of the appliance.This lock locks the lever of the trigger gunand prevents the inadvertent start of the ap-pliance.Safety DevicesPower switchLock trigger gun