Kärcher K 6.80 M Manual

Also see for K 6.85 M: Operating instructions Operator's manual User guide Assembly and user instructions Short instructions

Kärcher K 6.80 M Manual Manual pdf 16 page image

16 EnglishWhen unpacking the product, make surethat no accessories are missing and thatnone of the package contents have beendamaged. If you detect any transport dam-ages please contact your dealer.Illustrations on Page 21 Coupling element for water connection2 Fine filter in the water connection3 Water connection4 Appliance switch "0/OFF“/ „I/ON“5 Storage for trigger gun6 Detergent Tank7 Dosage regulator for detergent8 Transport handle9 Storage for high-pressure hose10 Storage for spray lance11 Mains cable with mains plug12 High pressure connection13 Bearing wheel14 Trigger gun15 Lock trigger gun16 Key to detach the high-pressure hosefrom the trigger gun17 High pressure hose18 Washing brush19 Spray lance with dirt blaster20 Spray lance with pressure regulation(Vario Power)included in the scope of deliverypossible accessoriesSpecial accessories expand the possibili-ties of using your appliance. Please contactyour Kärcher dealer for further information.Mount loose parts delivered with applianceprior to start-up.Illustrations on fold-out pages!Î IllustrationInsert holder for trigger gun.Î IllustrationInsert the transport handle and screwin.Î IllustrationLock the detergent tank in place on theappliance.Close the detergent tank with the lid.Î IllustrationAttach the accessories holder.Î IllustrationPush the high pressure hose into thetrigger gun until it locks audibly.Note: Make sure the connection nippleis aligned correctly.Check the secure connection by pullingon the high-pressure hose.According to the applicable regula-tions, the appliance must never beused on the drinking water supplywithout a system separator. Use asuitable system separator manufactured byKärcher; or, as an alternative, a systemseparator as per EN 12729 Type BA.Note: Impurities in the water can damagethe high-pressure pump and accessories.For protection, the use of the Kärcher waterfilter (optional accessory, order no. 4.730-059) is recommended.Observe regulations of water supplier.For connection values, see type plate/tech-nical data.Î Use a fibre-reinforced water hose (notincluded) with a standard coupling.(Minimum diameter 1/2 inch (13 mm),minimum length 7.5 m).Î Screw the coupling unit (supplied) tothe water connection on the appliance.Î Push the water supply hose onto thecoupling unit, then connect it to the wa-ter supply.OperationDescription of the ApplianceSpecial accessoriesBefore StartupWater supplyWater supply from mains