Operating instructions KM 100/100 R B / KM 100/100 R LPG English28Unloading instructionsWarning!When the machine is loaded thefreewheel lever must generally beengaged in its bottom position. Onlythen are the drive system and theparking brake operable.— The machine was secured on apallet with stretch belts or ropesfor safe transport. Proceed asfollows when unloading:! Cut the plastic packing tape andremove the film.! Connect battery (seemaintenance work chapter)! Remove the blocks for securingthe wheels and drive the machineoff the pallet using a suitableramp.Warning!Do not use a fork lifter for unloading;the machine can be damaged by it.Before every operationGeneral notes! Stand sweeper on a flat surface! Remove the ignition keyTesting and maintenancework! Check engine oil level *! Check fuel tank level * (appliesonly to KM 100/100 R B)! Check that the union nut at thegas hose is firmly in place(applies only to KM 100/100 R LPG)! Check level of hydraulic oil *! Check side brushes *! Check main brush *! Empty the swept materialcontainer! Check tyre inflation pressure ** See maintenance work chapter forinstructionsCommissioningWarning!It is not permissible to cover the airsuction openings behind the driver’sseat.It is not permissible to depositobjects next to or behind the seat.Suction openingsAdjust driver seat! Open unit cover, engage stay bar! Slightly loosen wing nuts of seatrunners! Push the seat into theappropriate position! Retighten wing nutsNote:There is a further adjustmentpossibility if the adjusting range isinsufficient! Unscrew the 4 screws at the seatcontact switch plate! Remove the plate! Turn the seat forward! Unscrew the 4 screws of the seatmounting! Shift seat and refasten withscrews! Remount seat contact switchplate