Kärcher KM 105/100 R Bp User Manual

Also see for KM 105/100 R Bp: Manual

Contents

Kärcher KM 105/100 R Bp User Manual Manual pdf 19 page image

- 1512 SBroompos.not ok Is displayed when the optionally available sickle brushcannot move to the factory-set end position.– The appliance is ready for operation, however, thesweeping result may be dissatisfying or the sickle brushmay not be raised Confirm the message with the OK key (delete). Turn the programme selector switch to positionC (drive). Change to the desired sweeping programmeagain.13 Seat switch open Appears if the seat is left for more than 1.5 seconds indrive mode.– Device switches off, all brushes and the roller brushthat are lowered to the ground are raised automatically Sit on the driver's seat.Note: The selected sweeping / transport opera-tion starts fully automated.14 Usable sweepingbrush <25%Appears if the roller brush has reached its wear limit.– The appliance is ready for operation, however, thesweeping result may be dissatisfying Replace the roller brush as soon as possible toachieve a good sweeping result.15 MF-module notready to use xAppears if the control panel has no connection to themachine control.– The operation of the appliance is disabled Perform a programme selector switch reset(OFF position).16 Motorhood open! Appears if the left side cover is not properly locked inplace.– The operation of the appliance is disabled Completely close the left cover and lock inplace. Turn the programme selector switch to "ON".Note: The message disappears. The applianceis ready for operation.18 Charge battery! Appears if the battery voltage is low.– All sweeping functions are switched off, the applianceis still runningNote: The message can no longer be confirmed. Charge battery.19 BAT shut-down Appears if the battery is empty.– The operation of the device is prevented for the protec-tion of the battery, device can no longer be driven. Charge battery.20 MF-mod. requestsfirmware update!Appears if the machine control has detected a safety-critical error during the self test.– The operation of the appliance is disabled Call service!22 Call service!+xx-xxxx-xx-xxxxThe inspection interval has lapsed. This message ap-pears upon every start-up of the appliance.– The appliance remains fully operational Confirm the message with the OK key (delete). Contact your local service for inspection underthe displayed phone number.23 Red 0/1 switch=0Operation lockedThe message appears both during operation and start-up of the appliance if the red main switch is in the "0" po-sition.– The appliance operation is prevented Set main switch to “I/ON”.24 Easy oper.switchmust be OFF nextThis message appears in connection with message 23.  For safety reasons the start-up of the appliancerequires the switching-off of the programme se-lector switch (OFF position)!Display Meaning and consequence Corrective measuresTroubleshooting with coded error message on the displayNote:A coded error message is always displayed in the upper display line and has the following formats:X yyy Identification letter X followed by up to 3 digits yyye.g.S 110There is a system error that completely or partly disables the appliance function.e.g.P 3C 41H 2There is an error in the machine control. Individual or several appliance functions are disabled.If a coded error occurs, try resetting the programme selector switch first.In order to do so, turn the programme selector switch in the "OFF" position. Wait for at least 5 seconds before restarting the appliance.If the error is still pending, contact service. The indication of the error code may be helpful for the service!19EN

/ 22

Related manuals for Kärcher KM 105/100 R Bp