Operating Instructions KMR 1700 D English35Rear eyeboltCleaning and maintenance! Stand sweeper on a flat surface! Pull-off the key! Lock the hand brakeInternal cleaningDanger!! Wear dust mask!! Wear safety goggles!Notes:Clean with a ragBlow-out with compressed airExternal cleaningClean with a moist ragNote:Do not use aggresive cleaningagents!Maintenance intervalsElapsed-time meterElapsed-time meter indicatesmaintenance interval timesMaintenance by thecustomerDaily maintenance! Check the engine oil level! Check the cooling water level! Check the tyre air pressure! Check roller and side brush forwear and trapped strapsAdditional maintenance once aweek! Clean radiator! Check the hydraulic oil levelAdditional maintenance every100 hours/ once a year! Change the engine oil! Replace the oil filter insert! Lubricate the bearings andcylinders! Check V-belt tension! Checking the battery acid level! Cleaning the fuel filter! Check fuel hose and clamp! Cleaning the air filter elements! Check hydraulic systemAdditional maintenance every 200hours/ every six months! Check the cooler hoses andclampsMaintenance according to degreeof wear! Replace sealing strips! Replacing the sweep roller! Replacing the side broomNotes:Where maintenance is undertakenby the customer, all service andmaintenance work must be carriedout by a qualified employee.A Kärcher specialist dealer can beconsulted whenever support isnecessary.Observe the instructions given inthe maintenance booklet5.950-547Maintenance by thecustomer servicedepartmentMaintenance after 20 operatinghours! First inspectionMaintenance operations every400 operating hours/ every sixmonthsMaintenance operations every1200 operating hoursNote:To safeguard warranty rights, duringthe warranty period all service andmaintenance work must beperformed by an authorised Kärcherafter sales service.Maintenance tasksNotes on safetyWarning!Read and observe the attachedbrochure before commencingmaintenance tasks.Safety precautions No.. 5.956-250Warning!Preparations! Stand sweeper on a flat surface! Remove the ignition key! Lock the hand brake! Always insert locking rod whenbin is raisedToolkitPosition of the tool kitCheck engine oil level andtop-upAt the earliest, check 5ºmin afterstopping the motor! Pull-out the oil dip rod! Wipe the oil dip rod and push it in