Kärcher RC 3000 Operator's Manual

Also see for RC 3000: Operating instructions Instruction manual Original instructions

Contents

Kärcher RC 3000 Operator's Manual Manual pdf 10 page image

10 – English RC 3000OperationParkingIf you want the robot to interrupt the cleaning after the next char-ging cycle, then...• Press the “Parking the robot” button (B).The “Parking” indicator lamp (A) is activated.After its next return to the station, the robot is emptied andcharged. Then, the robot is turned off and comes to a stand-still in front of the station.Selecting the Cleaning DurationIf you want the robot to clean for a specific period of time, then...• Press the “C” button until the desired cleaning duration is set(default setting: permanent cleaning).Press once – 3-hour-cleaningfor rooms smaller than 45 m²Press twice – 6-hour-cleaningfor rooms between 45 m² and 90 m²Press three times – 9-hour-cleaningfor rooms between 80 m² and 135 m²Press four times – permanent cleaning is set again.The selected cleaning duration begins and is displayed by oneof the indicatorlamps. If the selected cleaning duration has elap-sed, the robot is emptied and charged and then comes to astandstill in front of the station.Quiet ModeIdeal for cleaning runs during the night or if you are at home.• Press the “Quiet mode” button (B).The “Quiet mode” indicator lamp (K) is activated. The stationcleans the robot for 8 hours with a reduced noise level and areduced performance. Then, the station returns to normal ope-ration.Figure 9: Parking the robotFigure 10: Selecting the cleaning durationFigure 11: Setting the quiet mode1. operating program – normal cleaning– Robot runs according to the random method at normal speed.2. operating program – individual dirty spot– Robot slowly moves across the dirty area.3. operating program – individual very dirty spot– Robot slowly runs forwards / backwards across the dirty area.4. operating program – extensive, very dirty area– Robot runs slowly and radially across the dirty area describing a star.Operating ProgramsThe selection of the operating program is control-led by sensors located in the dirt receptacle. The selection ismade according to the detected degree of dirt accumulation.The robot provides of four operating programs that allow him toautomatically adjust to the various degrees of dirt accumulationon the floor. The dirtier the floor, the more extensive the cleaningperformed by the robot. If the degree of dirt accumulation hasbeen reduce, the 1st operating program is selected again.