Kärcher VC 6200 Instructions Manual

Also see for VC 6100: Operating instructions Manual Manual

Kärcher VC 6200 Instructions Manual Manual pdf 10 page image

English 7 Do not use worn out appliance; first put itout of use; then arrange for its properdisposal as scrap.Please take notice! Should, while turningthe appliance on, the mains furse trippershut off, possibly, other electrical applianc-es are connected and are operating on thesame electric circuit. Should this be thecase, put the appliance in its lowest powerstage, before turning the appliance on. After-wards you may select a higher power stage.Refer to chapter "Technical data" for powerfuse protection.Important notice! The appliance will shut-down automatically, if there is danger ofoverheating. Turn the appliance off and pullthe power plug. Make sure, that the nozzle,the suction pipe or the tube is not clogged,failing all the above the filter must bechanged. After the elimination of the interfer-ence let the appliance cool down for a mini-mum of 1 hour, before using it again.Please unfold the pages with the dia-grams!1 Power cord with plug2 Push button take-up cable3 On/Off button4 Suction control5 Suction hose6 Handle(A) Manual vaccum slide7 Teleskopic suction pipe *8 Adjustable teleskopic suction pipe *9 Floor nozzle10 Cover attachment housing11 Attachment housing QuickClick:includes upholstery nozzle, telescopicgap nozzle and a furniture brush12 Change filter indicator13 Shutter lever, lid filter bag/ motor protec-tion filter14 Motor protection filter15 Filter bag holder16 Cover HEPA filter17 HEPA-filter18 Carrying handle* depending on modelFigure 1Î Lock the suction hose neck in the suctionopening.Î To take off, push both lock devices to-gether and pull the tube.Figure 2Î Connect handle and suction tube and in-sert.Î Connect the floor nozzle and telescopicsuction pipe and insert.Figure 3Î Use the ajustment in order to adjust thetelescopic suction pipe to the lengh youwish.Figure 4Î When you stop or you take a short break,hang the floor nozzle into the parking po-sition on the back of the appliance, andpush it into the resting position.Figure 5Î To remove, press handle backwards inthe direction of the appliance. The floornozzle is thus unlocked from the parkingholder and can be removed upwards.Figure 6Î Hold the power cord at the plug and pullit out. Insert the mains plug into a socket.Î Turn on/off the appliance.Commissioning and operationDescription of the ApplianceStart up