Kärcher puzzi 100 Operating Instructions Manual

Also see for puzzi 100: Operating instructions Manual Manual Instructions Manual

Contents

5English1 Housing2 Carrying handle3 Fresh-water tank with suction strainer4 Dirty-water reservoir, removable5 Cover6 Spraying: switch on and off7 Vacuuming: switch on and off8 Spray and suction hose complete9 Power plug with cable10 Floor nozzle for cleaning carpets – workingwidth 230 mm11 Hand nozzle for cleaning upholstery – workingwidth 110 mm (optional accessory)12 Defoamer container (puzzi 200 only)13 Storage compartment for RM 760, tabs(puzzi 200 only)14 Additional connector for the Profi washing headPW 10 (puzzi 200 only)Optional accessoriesWe offer various optional accessories for a widervariety of applications.See them in our catalogue or ask at your nearestKärcher retail outlet.to the appropriate collection points forrecycling.WarrantyThe applicable warranty conditions in differentcountries are issued by the respective nationaldistributor of our products. During the warrantyperiod, any malfunctions of the cleaner causedby a material or manufacturing defect will berepaired free of charge.In the event of a warranty claim, please take thecleaner, with the accessories and proof ofpurchase, to your original dealer or to the nearestauthorised customer service centre.! Important informationFor your safetyTake note also of all instructions enclosed withthe detergents used.The recommended detergents may not be usedundiluted. The products are safe to use becausethey contain no acids, alkalis or substancesharmful to the environment. We advise you tostore the detergents so that they are inaccessibleto children, to bathe the eyes thoroughly withwater should the detergents come into contactwith them and to consult a doctor should they beswallowed.Legal regulations should be observed fordisposal of dirty water and detergent solution.When using the Profi washing head the relatedsafety notes and operating instructions must beobserved.For the sake of the environmentWhen you unpack the unit do not simply throwpackaging out with the household rubbish.Hand over the different parts of the packagingOperating the cleanerUsing the cleaner correctlyThis unit is designated for industrial use.– as a wet cleaner for carpets and carpeting– in accordance with the explanatory detailsand safety information contained in theseoperating instructionsUsing the cleaner in any other way is consideredto be contrary to its intended purpose. Themanufacturer will not be liable for any damagesthat occur as a result of improper usage. In suchcases liability rests solely with the user.Putting into operation for the first timen Put the suction hose of the spray-suctionhose on to the connector on the unit (Fig. 1a).Press the coupling of the spray hose on to theconnector. Make sure they engage properly(Fig. 1b).n Place the spray-suction hose firmly on thegrip section (Fig. 2a) and place the couplingof the spray hose on the connector of the gripsection. Make sure they engage properly(Fig. 2b).n Put on the suction tube and floor nozzle andmake the connection secure by turning theunion nut by hand in an anti-clockwisedirection.Important note: Make sure that the spray tubelying inside the tube is properly connected,otherwise this will lead to a malfunctioning of theunit.n The hand nozzle for cleaning upholstery(optional accessory) is placed directly on thespray-suction hose.Please first unfold the left coverfor the illustrations.