KEB COMBIVERT F5 Instruction Manual

Also see for COMBIVERT F5: INSTALLATION GUIDELINE Installation manual Instruction manual Instruction manual Installation manual

43If you create a new project in the Simatic-Manager (e.g. via file → Assistent New Project...) first select the desiredS7-CPU. Then change to hardware configuration and paste by right click to the PN_IO interface of the CPU andinsert selection PROFINET IO-system ... a PROFINET system.If the synchronous communication (PROFINET IO-IRT) shall be used, the PN-IO interface of the CPU can beconfigured by right-clicking on the PN-IO interface of the CPU and select object properties as a sync master:Then in the right part of the HW Config window of PROFINET-IO → additional field instruments → ....the KEBF5 PROFINET operator selected and appended with the mouse to the PROFINET System in the left pane. It isimportant that the PROFIDRIVE_PAP module is placed into slot 3: