KEB Combivert F5 Instruction Manual

Also see for COMBIVERT F5: INSTALLATION GUIDELINE Installation manual Instruction manual Instruction manual Installation manual

Contents

4Preface1. PrefaceThe described hard- and software are developments of the Karl E. Brinkmann GmbH. Theenclosed documents correspond to conditions valid at printing. Misprint, mistakes and techni-cal changes reserved.1.1 Information on special measuresThe used pictograms have following significance:Danger Is used, when death or serious bodily injury may be the consequenceof non-observance of the measure.Warning Is used, when bodily injury and/or substantial property damage maybe the consequence of non-observance of the measure.Caution Is used, when property damage may be the consequence of non-ob-servance of the measure.Attention Is used, when noise sensitive or unrequested operation may be theconsequence of non-observance of the measure.Info Is used, when a better or simpler result can be the consequence of themeasure.For a special case the instructions can be supplemented by additional pictograms and text.1.2 DocumentationPrior to performing any work on the unit the user must familiarize himself with the unit. Thisincludes especially the knowledge and observance of the safety and operating instructions.Attention Observe safety and operating instructionsPrecondition for all further steps is the knowledge and observance of thesafety and operating instructions. This is provided accompanied by the de-vice or by the download site of www.keb.de.Non-observance of the safety and operating instructions leads to the loss of any liabilityclaims. The warnings and safety instructions in this manual work only supplementary. Thislist is not exhaustive.1.3 Validity and liabilityThe use of our units in the target products is beyond of our control and therefore exclu-sively the responsibility of the machine manufacturer, system integrator or customer.The information contained in the technical documentation, as well as any user-specific advicein spoken and written and through tests, are made to best of our knowledge and informationabout the application. However, they are considered for information only without responsibil-ity. This also applies to any violation of industrial property rights of a third-party.