KEF T-2 Installation Manual
Also see for T-2: Brochure & specs
7Please take heed of the following before using the KEF Model T-2. Note also that the word “appliance” shall refer to the KEF T-2subwoofer, or any part of it.1. Read Instructions – All the Safety and Operating Instructions should be read before the appliance is operated.2. Retain Instructions – The Safety and Operating Instructions should be retained for future reference.3. Heed Warnings – All warnings on the appliance and in the Operating Instructions should be adhered to.4. Follow Instructions – All Operating and Use Instructions should be followed. Only use attachments/accessories specified by the manufacturer.5. Important – Do not defeat the safety purpose of the polarized or grounding type plug. The third prong is provided for your safety. If the providedplug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Refer all servicing to a qualified service personnel.Servicing is required for any damaged parts such as power-supply cordor plug.6. Water and Moisture – The appliance should not be used in or near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in awet basement, or near a swimming pool, and the like. The appliance shall not be exposed to dripping or splashing. Care should be taken so that objectscontaining liquids are not placed upon or spilled into the enclosure through openings and that no objects filled with liquids, such as a vase, shall beplaced on the appliance.7. Ventilation – The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, theappliance should not be situated on a bed, sofa, or similar surface that may block any ventilation openings.8. Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) thatproduce heat.9. Power Sources – The appliance should be connected to a power supply only of the type described in the Operating Instructions or as marked onthe appliance and it shall remain readily operable. Mains plug is used as the disconnect device. To be completely disconnected from the power input,the mains plug of the appliance must be disconnected from the mains completely. The building installation shall be regarded as providing protection inaccordance with the rating of wall socket outlet.10. Power-cord Protection – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon oragainst them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit from the appliance. The main plugshould not be obstructed OR should be easily accessed during intended use.11. Attachments and Accessories – Use only attachments/accessories specified by the manufacturer.12. Handling – The appliance should be transported with the cart, stand, tripod, bracket, or table specified by manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/appliance combination to avoid injury from tip-over.13. Non-use Periods – Unplug this appliance during lightning storms or when unused for long periods of time.14. Damage Requiring Service – The appliance should be serviced by qualified service personnel when:a) The power supply cord or the plug has been damaged; orb) Objects have fallen or liquid has been spilled into the appliance; orc) The appliance has been exposed to rain; ord) The appliance does not appear to operate normally or exhibits a marked change in performance; ore) The appliance has been dropped or the enclosure damaged.15. Servicing – The user shall not attempt to service the appliance beyond that described in the Operating Instructions. All other servicing should bereferred to qualified service personnel.WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTUREImportant safety instructionsCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.• A combined mains power input lead and country specific mains plug is provided.• Check before connecting to your local mains supply that the local supply voltageis the same as that marked on the rear panel. If it is not, check with your supplierbefore proceeding.Explanation of Graphical SymbolsThe lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerousvoltage” within the products enclosure that may be of a sufficient magnitude to constitute a risk of electrical shock to persons.The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.WARNING:Due to the mains switch being located on the rear panel, the appliance must be located in an open area without anything obstructing access to the mains switch.The apparatus should be connected to a mains socket with a protective earthing connection.Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainablereuse of material resources.To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can takethis product for environmentally safe recycling. |
Related manuals for KEF T-2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine